User manual

Symptom Remedy

No sound 1. Check the power supply of the transmitter and receiver.

2. Make sure that both transmitter and receiver operate in the same frequency

range. The frequency range is stated on the devices.

3. Are both transmitter and receiver set to the same channel?

4. Check the connection between the receiver and the connected audio device

(amp, mixer). Is the connected audio device switched on and does the signal

level on the output of the receiver match the input sensitivity of the audio

device?

5. Try to improve the transmission by moving the transmitter closer to the

receiver.

6. Make sure that no metal objects near the transmitter or receiver obstruct the

transmission.

Transmission is disturbed 1. Modify the orientation of the antennas.

2. If you use more than one wireless system at the same time, check the used

frequencies and channels.

3. Interference can also be caused by other radio or in-ear systems.

Troubleshooting

UHF wireless system