User manual

1. Hold down [SET] until the [SQ] area blinks on the display.
2. Use the arrow buttons to set the desired value. The current value is shown on the right
side of the display.
3. Press [SET] to conrm the selection.
ð
After three seconds, the display shows the default state again.
1. Press [AUTO].
ð
The [AUTO] display blinks; the display shows the number of free channels available.
2. Use the arrow keys to select one of the free channels.
Press [SET] to conrm the selection.
ð
After three seconds, the display shows the default state again.
3. If the system does not nd a free channel within ve seconds, it automatically returns to
the default state.
Setting squelch
Automatic search for a free
channel
Operating
free solo HT
33