User manual

1. Keep pressing [SET] until the number in the [GAIN] eld blinks on the display.
2. Use [SEL] to change the transmitter gain in increments of 3 dB (–3 dB, 0 dB, 3 dB, 6 dB,
9 dB).
Press [SET] to conrm the selection. Press the main switch to close the menu without
making any changes.
1.
Keep pressing [SET] until the symbol blinks on the display.
2. Use [SEL] to change the transmitter power (5 mW, 10 mW, 20 mW).
Press [SET] to conrm the selection. Press the main switch to close the menu without
making any changes.
Setting gain
Setting transmitter power
Operating
UHF wireless system
36