User manual

6 Operating

6.1 Receiver

1. Press [SET].

The [GP] display blinks.

2. Use the arrow keys to select the frequency group.

Press [SET] to conrm the selection.

The [CH] display blinks.

3. Use the arrow keys to select a channel within the set frequency group.

If you have selected frequency group ‘U’ you can use the arrow keys to set the fre‐

quency directly in 25 kHz increments. First set the value before the decimal point, and

press [SET]. Then set the value after the decimal point.

Press [SET] to conrm the selection.

The display shows that the receiver is being adjusted to the new frequency. After a

few seconds, the display shows the normal sate again.

Select frequency

Operating

UHF wireless system