User manual

1. Keep pressing [SET] until the number in the [GAIN] eld blinks on the display.
2. Use [SEL] to change the transmitter gain in increments of 3 dB (–3 dB, 0 dB, 3 dB, 6 dB,
9 dB).
Press [SET] to conrm the selection. Press the main switch to close the menu without
making any changes.
1.
Keep pressing [SET] until the symbol blinks on the display.
2. Use [SEL] to change the transmitter power (5 mW, 10 mW, 20 mW).
Press [SET] to conrm the selection. Press the main switch to close the menu without
making any changes.
Setting gain
Setting transmitter power
Operating
free solo Twin HT free solo Twin PT free solo Twin HTPT
43