User manual

13 [GP]
Indicates the selected frequency group.
14 [CH]
Indicates the selected channel.
15
Indicates that the unit is locked to prevent unintentional operation.
16
Shows that the receiver does not receive a signal, for example because the transmitter has been switched o, the
connection is disturbed or the channel is currently being switched.
17 [A/B]
Shows which of the two antennas is currently being used for signal transmission.
18 [SQ]
Shows the set squelch level for the radio signal. Setting the squelch too high will lower the dynamics of the system.
19 [RF]
Shows the level of the radio signal received.
Connections and controls
free solo Twin HT free solo Twin PT free solo Twin HTPT
29