User manual

3. Press the jog wheel to close the display.

4. Turn the jog wheel left or right to select the menu item ‘Exit&Save’ .

5. Press the jog wheel to return to the home screen.

1. Turn on the transmitter and point the infrared sensor of the transmitter directly at the

[ACT] button of the receiver.

2. Press [ACT].

The message ‘ACT...’ in the display indicates that the synchronization is running.

3. After successful synchronization, the display appears in the default state. The battery

status of the transmitter with which you just synchronized is now displayed here.

If the synchronization has failed, the message ‘FAIL’ appears. In this case, hold the trans‐

mitter closer to the receiver and restart the synchronization.

Synchronizing transmitter and

receiver

Operating

GigA Pro Body Set