User manual

Press or to set the output level. The level can be adjusted in a range from –10…
+20 dB.
The [SET/HOME] button that you need to set up the receiver is located under the bat‐
tery compartment lid.
1. Open the battery compartment to access [SET/HOME].
2. Press an hold [SET/HOME] to call the parameter setup mode.
ð
The display shows ‘ACT’ next to the current channel and ID assignment.
3. To exit the parameter setup mode, press and hold [SET/HOME] again until ‘ACT’ disap‐
pears.
Setting the output level
Parameter setup
Operating
GigA Pro Bodypack Receiver
25