User manual

1.
Enter the parameter setup mode and press [/MODE] until the display shows ‘SET LOCK’ .
2.
Press [/ACT/SET] once.
ð
The cursor is blinking.
3.
During blinking, press [/ACT/SET] to lock ( ‘LOCK’ ) or unlock ( ‘UNLOCK’ ) the settings
lock.
ð
In the ‘LOCK’ status, no changes can be made to channel, ID or other conguration
parameters.
4.
Press [/MODE] to save the value.
The lock settings function protects against unintentional changes to the device congu‐
ration.
Lock settings
Operating
GigA Pro Bodypack Receiver
29