User manual

8 [GND] / [LIFT]

Ground / lift switch. If hum is caused by a ground loop, you can use this switch to disconnect the connection

between the earth pin of the device housing and the signal ground.

9 [OUT C]

Male XLR panel connector as symmetrical audio signal output C for direct connection with a mixer, a power amplier,

or a recording device.

10 [POWER]

Main switch. Turns the device on and o

All previous settings are retained even when you switch the device o and disconnect it from the mains.

11 [DC IN]

Connector for the supplied power supply adapter

12 [TUNER]

External tuner output, designed as 1/4" jack socket (mono, unbalanced)

Connections and controls

GigA Pro Pedal Set