User manual

Menu item Value range Meaning
‘Output’ ‘A’ , ‘B’ , ‘C’ , ‘A+B’ , ‘A+C’ , ‘B
+C’ , ‘A+B+C’ ,
Selecting the outputs to which the signal should be passed.
Each output can be enabled or disabled separated from the
others.
‘SetColor’ ‘Green’ , ‘Red’ , ‘Blue’ , ‘Orange’ ,
‘Purple’ , ‘Aqua’ , ‘White’ ,
‘Yellow’
Selecting a colour for the LEDs.
‘Channel Scan’ Starts a check of the available radio channels. The display shows
the result with a graphical representation. The check runs until
you press the jog wheel.
The evaluation result is displayed. Here, the vertical bars indi‐
cate how strong the interferences on the respective channel are.
The ‘T+’ symbol indicates the currently used channel. The ‘T!’
symbol is displayed for channels that are occupied by other
devices. The symbols ash for the channel currently being
tested.
Turn the jog wheel to select another channel. The number of
the set channel is underlined. Press the jog wheel to conrm the
selection.
Operating
wireless system
32