Manual
T.BONE • IEM 100 - 800 / 100 - 863 MHZ
www.thomann.de
11
Technical specifications
Total system
Transmission frequency range Model 100-800: 790 – 814 MHz
Model 100-863: 863 – 865 MHz
Transmitter output level 10 dBm
Operating range 50 m Ø
(under typical conditions)
Audio frequency response 60 Hz – 16 kHz ± 3 dB
THD < 1 % @ 1 kHz
Dynamic range > 90 dB (A-weighted)
Operating temperature range -10 °C – + 50 °C (battery
characteristics may limit this range)
Transmitter
Max. audio input level + 12 dBV
Gain adjustment range 40 dB
Input impedance 100 kΩ
Dimensions (H x W x D) 44 x 212 x 160 mm
Weight 960 g
Power requirements 12 – 18 V , 300 mA,
(delivered by mains adaptor supplied)
Primary voltage of mains adaptor:
AC 230 V
Wiring XLR inputs Impedance balanced, Pin 1 = ground,
Pin 2 = positive polarity terminal (hot),
Pin 3 = negative polarity terminal (cold)
Receiver
Audio output level 100 mW
Sensitivity -94 dBm for 30 dB SINAD, typical
Image rejection > 55 dB
Dimensions (H x W x D) 90 x 64 x 23 mm
Weight 100 g (without batteries)
Power requirements 2 x 1.5 batteries, size AA
Battery life Ø 5 hours
Our products are subject to a process of continual further development.
Therefore modications to the technical features remain subject to change
without further notice.