User manual

Table Of Contents

Press the [SET] button repeatedly until ‘ON’ or‘OFF’ and the ‘HF’ field are flashing in the dis-

play. Use the or button to turn the treble boost function on or off (display =‘ON’ or ‘OFF’).

If this function is enabled, the frequencies above 10 kHz are boosted by 6 dB and the display

shows the ‘HF’ field. If the function is disabled, there is no treble boost.

Press the [SET] button to confirm the setting and proceed to the next menu item. Press [ESC] to

confirm the setting and exit the menu.

Press the [SET] button repeatedly until ‘ON’ or ‘OFF’ and the symbol are flashing in the dis-

play. Use the or buttons to toggle between locked status (display =‘ON’) and normal

operation (display =‘OFF’). In locked status, you can view the system settings, but you cannot

change them. In this case the display shows the symbol.

Press the [SET] button to confirm the setting and proceed to the next menu item. Press [ESC] to

confirm the setting and exit the menu.

Turning on the treble boost

Lock settings

Operation

IEM 100-R