User manual

Transmitter and receiver must be set to the same combination of frequency group

and channel. If you use multiple wireless systems from this device family, for best

results you should assign all systems to the same frequency group, but give each

system a dierent channel.

Alternatively to selecting the frequency group and channel, you can also set the transmitter

frequency directly.

To set the frequency directly, press [SET] to open the menu. Use the [+] and [–] keys and select

‘FRQ’ . The eld ‘FRG’ in the bottom line of the display ashes. Conrm with [SET]. The rst

three numbers in the frequency display ash. Use the [+] or [–] keys to increase or reduce the

displayed value. When the desired value is displayed, press [SET]. The last three numbers in the

frequency display ash. Use the [+] or [–] keys to increase or reduce the displayed value. When

the desired value is shown press [SET] to conrm the setting and exit the menu.

The display shows the transmitter frequency set in MHz.

To set the frequency directly

Operating

IEM 150