User manual

Alternatively to selecting the frequency group and channel, you can also set the transmitter
frequency directly.
To set the frequency directly, press [SET] to open the menu. Use the and keys and select
‘FRQ’ . The eld ‘FRG’ in the bottom line of the display ashes. Conrm with [SET]. The rst
three numbers in the frequency display ash. Use the and keys to increase or decrease the
indicated value. When the desired value is displayed, press [SET]. The last three numbers in the
frequency display ash. Use the and keys to increase or decrease the indicated value.
When the desired value is shown press [SET] to conrm the setting and exit the menu.
The display shows the transmitter frequency set in MHz.
To start an automatic frequency search, press [SET] to open the menu. Use the and keys
and select ‘SCAN’ . The eld ‘SCAN’ in the bottom line of the display ashes. Conrm with [SET].
The display shows ‘SC’ and the search begins. The lines next to ‘SC’ ash. The device's com‐
plete frequency range is scanned in 25 KHz increments. Once the search is complete, the value
is shown in the display. Press [SET] to conrm the setting and exit the menu.
The display shows the transmitter frequency set in MHz.
To set the frequency directly
Automatic frequency search
Operating
UHF wireless system
40