User manual

10 Connector for the supplied plug-in power supply.

11 [LOOP OUT CH1, CH2]

1/4" jack sockets (mono). Outputs for routing the audio signal to other InEar transmitters or monitor boxes.

12 [LEFT CH.1 IN] / [RIGHT CH.2 IN]

XLR socket (left and right channel) for direct connection to a mixing console, PA or any other audio device that serves

as signal source.

13 [ANTENNA OUT]

BNC-type chassis socket for the supplied UHF antenna. Make sure that the frequency indicated on the antenna is

within the range that is indicated on the transmitter.

14 UHF antenna

Connections and controls

IEM 150