User manual

Press [SET] to open the menu. Use the and keys and select ‘STEREO’ on the right-hand side

of the display. Use the and keys to switch between mono and stereo mode. When the

desired mode is shown press [SET] to conrm the setting and exit the menu.

Press [SET] to open the menu. Use the and keys and select ‘SQ’ . The eld ‘SQ’ in the

bottom line of the display ashes. Conrm with [SET]. The display shows ‘SQ – – 95’ or another

preset value. The ‘dB’ eld on the right-hand side of the display lights up and the value ‘– 95’

or another preset value ashes.

Selecting the operating mode

Switching on squelch

Operating

IEM 150