User manual

6 Operating
6.1 Setting up the transmitter
Press [SET] to open the menu. Use button [+] and [–], and choose ‘GRP:01’ . The eld ‘GRP:01’ in
the bottom line of the display ashes. Conrm with [SET]. Use the keys [+] and [–] to select the
required group and press [SET] to conrm. Press [SET] again to conrm the setting and to set
the channel.
The eld ‘CH’ in the bottom line of the display ashes. Conrm with [SET]. Use the keys [+] and
[–] to select the required channel and press [SET] to conrm.
Use the [+] or [–] keys to increase or reduce the displayed value. When the desired value is
shown press [SET] to conrm the setting and exit the menu.
The display shows the used transmission frequency in MHz that is assigned to the set combina‐
tion of frequency group and channel.
Selecting frequency group and
channel
Operating
UHF wireless system
36