User manual

Drawing and table indicate the pin assignment of a 1/8" TRS mini phone plug for stereo use.
1 Signal (left)
2 Signal (right)
3 Ground, shielding
n Make sure that both transmitter and receiver are switched off. The transmitter display is
dark.
n Attach the receiver with the clip to your belt or guitar strap.
n Carefully insert the earplugs into the ear canal, observing the markings ‘L’ and ‘R’ for left
and right sides.
n Turn the transmitter and the receiver on and test the transmission. Make sure that both
transmitter and receiver are set to the same frequency group and the same channel. If nec‐
essary, adjust the volume on transmitter and receiver as well as the mixer or amp levels.
Also note the user manual that belongs to the transmitter.
Phone socket for earplugs
Starting up the system
Installation and starting up
UHF receiver
16