Data Sheet

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [e-mail] DocID: 382053_25.04.2017
EN
Safety instructions
Intended use
This device is used to supply phantom power to up to two AKG Series III con-
denser microphones and to mix two microphone signals. Any other use or use
under other operating conditions is considered to be improper and may result
in personal injury or property damage. No liability will be assumed for damages
resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and
are not within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the
like) from the unit. They could swallow the pieces and choke! Never let unat-
tended children use electrical devices.
Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
Battery Power Supply
User manual
This manual contains important information on the safe operation of the device. Read
and follow the safety advices and instructions given. Retain the manual for future refer-
ence. If you pass the device on to others please include this manual.
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic elds
Interference with other electrical equipment
Using the device near radios or TV sets may cause interference. Then increase the
distance between the devices.
General handling
• To prevent damage, never use force when operating the switches and controls.
• Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or ammable cleaning agents.
Keep foreign substances from the unit!
Keep the device away from containers with liquids. Should any liquid get into the unit,
this could lead to its destruction or re. Be sure not to let any metal objects into the
unit.
Features
• 9V battery supply
• Suitable for AKG Series III microphones with TA3F port
• Two mini XLR inputs with separate volume controls
• Lightweight and durable
• Comes with belt clip
• Up to 50 hours operating time with one battery
Operating elements
&
$
'
)
ö #
%(
Using the device
1. Connect up to two suitable microphones to the microphone inputs. The signals
from both inputs are mixed together in the device.
2. Connect the output of the device via an XLR cable to the desired device (mixer,
recorder, or the like).
3. Adjust the output level of the device to the input of the device to which you
connect the device. If that device expects microphone level set the switch to the
MIC position. At a lower sensitivity of the device, set it in the LINE position.
4. Set the ON / OFF switch in the ON position to turn the device on.
5. Adjust the volume as required for each input separately with the VOL +/- controls.
Technical specications
Power supply: 9V battery, 6F22
Current draw: max.10mA
Number of input channels: 2
Max. input level: 0dBV
Input impedance: 5kΩ
Input attenuation: -50dB
Phantom voltage: 55V max.
Jitter: typ. 200Ω unbalanced
6. If necessary, clamp the device with the belt clip to your clothing or equipment.
7. If the performance of the device deteriorates the battery is exhausted. In order
to replace it, set the ON / OFF switch to the OFF position to turn the device
o. Spread the belt clip so that its end pieces come out of the case openings
and put it aside. Then remove the battery compartment cover, remove the old
battery, disconnect it from the contacts, which you then connect to the fresh
battery and insert it into the battery compartment. Replace the battery com-
partment cover and reattach the belt clip.
8. Turn the power back on.
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected for recy-
cling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your local waste
disposal facility.
Batteries must not be disposed of as domestic waste or thrown into re, but must
be disposed of according to local regulations regarding hazardous waste. Use
appropriate collection sites to do so.
Max. output level: 0dBV +/-1dB@k <1% and
battery voltage = 9V
Gain: Mic: 0dB +/- 1dB
Line: 40dB +/- 2dB
Noise: <8µV (A-weighted?)
Frequency response: 20Hz – 20kHz
Dimensions (W×H×D): 91×26×66mm
Weight: 130g
1. Left microphone input
2. Output
3. Right microphone input
4. Volume control right channel
5. Battery compartment cover
6. On / o switch
7. Volume control left channel
8. Output level switch (Mic | Line)