User manual

Table Of Contents

A balanced XLR mounting plug is used for signal output. Drawing and table indicate the XLR

pin assignment.

1 Ground, shielding

2 Signal (+)

3 Signal (–)

The ‘Figure-8’ characteristics of this microphone can be used, e.g., to record two singers simul‐

taneously. It often sounds better than two separate microphones in the same room. But even

with only one singer the figure-8 characteristic makes sense, as the proximity effect creates a

pleasant, rich bass. The figure-8 characteristic emphasizes the sound source in front and

behind the microphone, but attenuates sources, which are arranged laterally to it. Place the

microphone about 30 % farther away from the sound source than an equivalent omnidirec‐

tional microphone.

The ‘t.bone’ logo on the unit marks the centre of the recording area.

XLR connection for signal

output

Polar pattern

Installation and starting up

RB100