User manual

Table Of Contents

The display on the front side of the device indicates the channel currently set after turning on

the device. To change the setting, unscrew the lower part of the housing. Press [SET] (button

next to the battery compartment) until the decimal point on the display ashes. If you briey

press the button now, you can change the channel number by one each time. The channel

numbers are represented by the characters „0“ … „9“, „A“ … „F“. If you do not press the button

for about six seconds, the device works with the current settings. Transmitter and receiver

must be set to the same channel.

Press briey [POWER / MUTE]. The ashing control LED indicates that the microphone is now

muted.

Press [POWER / MUTE] again to unmute the microphone.

Press [POWER / MUTE] until the control LED turns o. The unit is turned o.

Select channel

Mute microphone

Turning the unit o

Operating

tour guide system