User manual

6.4 Charger system TG C2
Connect the supplied power adapter with the power supply input of the unit. Then connect
the power adapter to a power outlet.
Turn o the Bodypack Transmitter or Receiver that needs charging. Position the charging con‐
tacts of the Bodypack unit over the charging contacts of the charging slot. Insert the Bodypack
unit into the charging slot so that it clicks into place. The control LED of the charging slot turns
o. It lights up again when the device is fully charged.
6.5 Charger system TG C18
Connect the supplied power adapter with the power supply input of the unit. Then connect
the power adapter to a power outlet. Using the main switch, turn the device on. The integrated
control LED lights up red.
Preparing the unit
Charging Bodypack units
Preparing the unit
Operating
tour guide system
40