User manual

Table Of Contents

Connect one of the audio outputs of the receiver to your mixer or amplifier. Make sure that

only one of the two outputs of the receiver is used at the same time. Otherwise, interferences

can by caused.

First adjust the volume control (6) as follows:

n If you use a microphone input of your mixer, turn the knob to about 1 o'clock. The audio

level at the output sockets will be about 77 mV.

n If you use a line input of your mixer, turn the knob clockwise to the right stop. The audio

level at the output sockets will be about 770 mV.

In order to achieve optimal sound quality, a fine adjustment may be required.

Hooking up audio connections

and starting up

Installation and starting up

TWS 16 PT