Manual

n Make sure that the transmitter is switched off, the main switch (14) is in ‘OFF’ position.
n Slide the ‘MIC/LINE’ switch (17) into the ’MIC’ position.
n Adjust the amplification to a mid value using the ’GAIN’ control (20). Use a suitable screw‐
driver.
n Connect the microphone cable to the input of the transmitter (mini XLR connector, 15).
n Turn the transmitter on and test the transmission with the microphone. If necessary, adjust
the amplification of the transmitter (using the ‘GAIN’ control) and the levels on your mixer
or your amp.
n Make sure that the transmitter is switched off, the main switch (14) is in ‘OFF’ position.
n Slide the ‘MIC/LINE’ switch (17) into the ’LINE’ position.
n Adjust the amplification to a mid value using the ’GAIN’ control (20). Use a suitable screw‐
driver.
n Connect the instrument cable to the input of the transmitter (mini XLR connector, 15).
n Turn the transmitter on and test the transmission by playing the instrument. If necessary,
adjust the amplification of the transmitter (using the ‘GAIN’ control) and the levels on your
mixer or your amp.
Connecting a microphone to the
transmitter
Connecting an instrument to the
transmitter
Installation and starting up
TWS 16 PT
27