Manual

1 POWER
Main switch to turn the device on and off.
2 CH
Rotary control to select a channel 1 to 16
3 ON
This indicator lights up red when the unit is turned on and operational.
4 RF LEVEL
These LEDs indicate the strength of the received carrier signal. The more LEDs light up, the better is the reception. If
no LED is lit no signal is received.
5 DIVERSITY
This indicator shows which of the two antennas is currently used for signal transmission.
6 VOLUME
Use this control to adjust the output level of the two audio outputs on the rear panel.
Components and functions
TWS 16 PT
31