201-USB Play mixer user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 19.09.
Table of contents Table of contents 1 General notes............................................................................................................................ 1.1 Further information........................................................................................................ 1.2 Notational conventions................................................................................................. 1.3 Symbols and signal words......................................................
General notes 1 General notes This manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sure that the buyer also receives this manual. Our products are subject to a process of continuous development. Thus, they are subject to change. 1.1 Further information On our website (www.thomann.
General notes 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. NOTICE! This combination of symbol and signal word indicates a possible dangerous situation that can result in mate‐ rial and environmental damage if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device is intended to be used for amplification, mixing and playback of signals from musical instruments and microphones. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is pro‐ tected by a residual current circuit breaker.
Features 3 Features n n n n n n n n n 2-channel DJ mixer with two USB / SD / Bluetooth players 1 × microphone input with talk over (1/4" phone jack) 1 × headphones output (stereo, as 1/4" phone jack) 2 × master outputs (XLR and RCA sockets) for left and right channel 1 × stereo monitor output (1/4" phone jack) 1 × output for recording device (RCA sockets) 2 × phono / line inputs (RCA sockets) 1 × booth output (1/4" phone jack) 2 × USB port for playback mixer 8
Installation 4 Installation NOTICE! Danger of short circuit Switching on phantom power will damage the device if unbalanced XLR cables are connected. Only turn on phantom power when exclusively balanced XLR cables are connected. Unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging.
Connections and controls 5 Connections and controls Front panel 1 MP3 player with left and right channel display 2 [PH1/LN1/MP3-A], [PH2/LN3/MP3-B] Selector switch for selecting the input source for left and right channels 3 [CH1 EQ / CH2 EQ] Rotary control for direct tone control of left and right channel (bass, mids, treble) 4 [CUE LEVEL] Rotary control for adjusting the headphones volume 5 [CUE / PGM] Rotary control to listen to the CUE or the active programme simultaneously or separately 6 [MASTER]
Connections and controls 7 [PHONES] Monitor output for headphones, designed as 1/4" phone socket (stereo). 8 [CHANNEL FADER] Slider for adjusting the volume of the left and right channel 9 Level meter shows the volume of the left and right channel. 10 [CROSSFADER] Slider for mixing the signals of the left and right channel If the controller is in middle position, both channels can be heard. 11 [CUE] Selects the channel that can be heard through the headphones.
Connections and controls Display 18 Display 19 [SD] SD card slot. Before ejecting, pause SD card playback or select another playback source (USB or Bluetooth). 20 Stops playback 21 Starts or pauses playback 22 Selects the previous track for playback 23 Selects the next track for playback 24 [MODE] Selecting the playback source (USB, SD, Bluetooth). To connect to a Bluetooth device, use the name ‘Bluetooth’ and the password 0000. 25 [USB] Connection for recording or playback via a USB device.
Connections and controls Rear panel 26 [Power] Main switch. Turns the device on and off. 27 IEC chassis plug for operating voltage supply with fuse holder. Should the fuse have blown, disconnect the unit from the power supply and replace the fuse with a new fuse of the same type.
Technical specifications 6 Technical specifications Inputs Microphone: 3 mV / 2.2 kΩ Phono: 3.2 mV / 47 kΩ Line: 150 mV / 47 kΩ Outputs Main: 0 dB / 1 V, 600 Ω Booth: 0 dB / 1 V, 600 Ω Rec: –5 dB / 0.5 V, 600 Ω Phone: 300 mW / 16…32 Ω Tone control (bass, mids, treble) –12 dB…+12 dB Frequency range 20 Hz…20 kHz, ±2 dB Signal-to-noise ratio > 104 dB THD < 0.
Plug and connection assignment 7 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equipment in such a way that a perfect sound experience is ensured.
Plug and connection assignment XLR plug (balanced) RCA connection 1 Ground, shielding 2 Signal (in phase, +) 3 Signal (out of phase, –) 4 Shielding on plug housing (option) Drawing and table indicate the pin assignment of an RCA plug.
Cleaning 8 Cleaning Fan grids The fan grids of the device must be cleaned on a regular basis to remove dust and dirt. Before cleaning, switch off the device and disconnect AC-powered devices from the mains. Use a lint-free damp cloth for cleaning. Never use solvents or alcohol for cleaning.
Protecting the environment 9 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
