User manual

14,16 [STEREO IN]
RCA sockets for connecting stereo sources.
15,17 [REC OUT]
Line outputs with RCA sockets for connecting recording devices.
18,19 [L]
1/4" phone input to connect the left signal of a stereo line level audio
source (keyboards, drum modules etc.).
With mono signals in the REC OUT channel, use this input with the
[R]socket unused so the signal is present at both sum channels.
20 [PAD]
Switch for lowering the input sensitivity with particularly powerful signals.
21 [LINE | USB]
Switch for selecting the analogue line input R / L or the USB input.
22, 23 [R]
1/4" phone input to connect the right signal of a stereo line level audio
source (keyboards, drum modules etc.).
24,25 [EQ], [LOW]
2-band EQ for treble [HIGH] and bass [LOW].
26 [AUX]
Rotary control to adjust the signal portion to be sent to the [AUX SEND]
output to e.g. create a monitor mix.
27 [FX]
Rotary control to adjust the signal portion, which is sent to the [FX SEND]
output.
28 [BAL]
Rotary control to arrange the channel signal within the stereo balance.
29 [PFL]-Schalter
With this switch pressed, the channel signal is unaectedly by the setting
of the channel fader and the internal eects section and present at the out‐
puts [PHONES] and [CR OUT] to adapt the values). The switch does not
aect the signal at the outputs [MAIN OUTPUT] and [REC OUT].
30 [PRE / POST]
When this switch is pressed, the signal portion set with the [AUX]control is
not aected by the channel fader ([PRE]). When the switch is not pressed,
the AUX signal is not subject to the channel fader ([POST]).
31 [PFL]-LED
This LED lights on activated PFL function.
Stereo channel strip
Connections and controls
xmix 1202 FX USB
11