User Manual xmix 1402 USB Mixer
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 13.09.
Table of contents Table of contents 1 General information.............................................................................................................. 1.1 Further information........................................................................................................ 1.2 Notational conventions................................................................................................. 1.3 Symbols and signal words..............................................................
xmix 1402 USB Mixer
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future refer‐ ence. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a possible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device is intended to be used for amplification, mixing and playback of signals from musical instruments and microphones. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if necessary, i.e. felt pads or similar.
Features 3 Features n n n n n n n n n n n n n n 12-channel mixer with built-in FX processor 8 mono channels (MIC, line) with low cut 3-band EQ and pan control 2 stereo channels with 2-band EQ and balance control Control room output L/R (1/4" jack) Additional RCA connections (stereo in / rec out) 1 × AUX control per channel, PRE/POST selectable PFL switch per channel Master output L/R via 2 × XLR and 2 × 1/4" phone socket Separately controllable headphones output (1/4" phone socket, stereo) Headphones out
Installation and starting up 4 Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Connections and controls 5 Connections and controls Mono channel strip MIC 1 1 [MIC] | balanced XLR mono input to connect a microphone ö 2 [LINE] | 1/4" phone input to connect a line level audio source (keyboards, drum modules etc.
Connections and controls Stereo channel strip / STEREO I N REC OUT 0 L L R R 1 3 LINE MONO L L 2 5 L I NE USB PAD 7 R 6 20 [PAD] | switch for lowering the input sensitivity with particularly powerful signals 21 [LINE | USB] | switch for selecting the analogue line input R / L or the USB input 22, 23 [R] | 1/4" phone input to connect the right signal of a stereo line level audio source (keyboards, drum modules etc.
Connections and controls Effects section, AUX D AUX SEND +15 8 E 0 0 FX SEND +15 8 F 0 +15 8 G 0 8 FX RETURN TO MIX FX RETURN TO AUX +15 34 [AUX SEND] | rotary control to adjust the overall level at the [AUX SEND] output 35 [FX SEND] | rotary control to adjust the overall level at the [FX SEND] output 36 [FX RETURN TO MIX] | rotary control to adjust the effects portion in the overall signal 37 [FX RETURN TO AUX] | rotary control to adjust the effects portion present at the [AUX SEND] out
Connections and controls 44 [CR OUT L] | control room output for connecting amplifiers or active speakers 45 [CR OUT R] | control room output for connecting amplifiers or active speakers P +48V OFF +48V ON Q R POWER CR & P HONES +18 +16 S +13 dB dB 10 10 5 5 0 0 5 5 10 10 15 15 30 30 +10 +6 V +3 0 -3 -6 8 8 -10 -20 -30 - 8 L PFL (PFL) R L T U R MIX MAX CR & P HONES 46 [+48V] LED | This LED lights up when the phantom power is on 47 [+48V] switch | When
Connections and controls 53, 54 [MAIN OUTPUTS] | balanced 1/4" phone outputs for connecting power amplifiers, effects or recording devices 55, 56 [MAIN OUTPUTS] | balanced XLR outputs for connecting power amplifiers, effects or recording devices 57 [POWER] | main switch to turn the device on and off 58 IEC chassis plug for mains connection with fuse holder.
Technical specifications 6 Technical specifications Max. output level (1% THD @ 1 kHz) MAIN OUTPUT XLR: +26 dBu ± 1 dBu 1/4" phone socket, balanced: +26 dBu ± 1 dBu Max. output level (1% THD @ 1 kHz) MAIN OUTPUT XLR: +21 dBu ± 1 dBu 1/4" phone socket, balanced: +26 dBu ± 1 dBu Headphones output 1/4" phone socket (stereo) 150 mW ± 5 mW @ 32 Ω Distortion (THD + N) <0.025% @ +14 dBu ± 0.
Plug and connection assignment 7 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equipment in such a way that a perfect sound experience is ensured.
Plug and connection assignment XLR plug (balanced) 1 Ground, shielding 2 Signal (in phase, +) 3 Signal (out of phase, –) 4 Shielding on plug housing (option) 1 Ground, shielding 2 Signal 3 Bridged to pin 1 XLR plug (unbalanced) RCA connection 18 xmix 1402 USB Mixer Drawing and table indicate the pin assignment of an RCA plug.
Protecting the environment 8 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 20 xmix 1402 USB Mixer
Notes xmix 1402 USB Mixer 21
Notes 22 xmix 1402 USB Mixer
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
