User manual

14, 16 [STEREO IN] | RCA sockets for connecting stereo sources
15, 17 [REC OUT] | line outputs with RCA sockets for connecting recording devices
18, 19 [L] | 1/4" phone input to connect the left signal of a stereo line level audio
source (keyboards, drum modules etc.)
With mono signals in the REC OUT channel, use this input with the [R]
socket unused so the signal is present at both sum channels.
20 [PAD] | switch for lowering the input sensitivity with particularly powerful
signals
21 [LINE | USB] | switch for selecting the analogue line input R / L or the USB
input
22, 23 [R] | 1/4" phone input to connect the right signal of a stereo line level audio
source (keyboards, drum modules etc.)
24, 25 [EQ], [LOW] | 2-band EQ for treble [HIGH] and bass [LOW]
26 [AUX] | rotary control to adjust the signal portion to be sent to the output
[AUX SEND] to e.g. create a monitor mix
27 [FX] | rotary control to adjust the signal portion to be sent to the [FX SEND]
output
28 [BAL] | rotary control to arrange the channel signal within the stereo bal‐
ance
29 [PFL] switch | When this switch is pressed, the channel signal is unaectedly
by the setting of the channel fader and the internal eects section present
at the outputs [PHONES] and [CR OUT]. The switch does not aect the signal
at the outputs [MAIN OUTPUT] and [REC OUT].
30 [PRE / POST] | When this switch is pressed, the signal portion set with the
[AUX] control is not aected by the channel fader ([PRE]). When the switch
is not pressed, the AUX signal is subject to the channel fader ([POST]).
31 [PFL] LED | This LED lights on activated PFL function.
32 [PEAK] | The LED lights up on channel overload. If this happens in the
STEREO IN channel press the [PAD] switch. When overload occurs in the
REC-OUT channel, reduce the output level of the signal source connected
here.
33 The channel fader sets the strength of the channel signal in the overall
signal.
Stereo channel strip
STER E O I N
L
R
REC OUT
L
R
L
R
LIN E
L
R
MONO
PA D
L NEI
USB
0
-10 +10
EQ
HIG H
12KHz
LO W
80Hz
0
-10 +10
AU X
0
-
8
+15
PRE
POST
FX
0
-
8
+15
BAL
L R
PFL
PE AK
dB
10
5
0
5
10
15
30
8
<
;
:
9
8
6
4
2
0
7
5
3
1
/
B
A
?
C
=
>
Connections and controls
12
xmix 802 USB
Mixer