Power Conditioner 12 power conditioner user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 19.06.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. NOTICE! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is used to compensate for fluctuations in the mains voltage and for protection against overvoltage. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions DANGER! Hazardous voltage Even in standby mode, mains voltage is present on the outputs of the device and on the connected loads. Prior to any servicing work on the connected loads, disconnect the mains plugs of the respective loads from the device. Prior to any servicing work on the device, disconnect the mains plug of the device from the mains socket. DANGER! Electric shock caused by short circuit Always use a properly insulated CEE cable to connect the unit to the 400 V mains grid.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. NOTICE! Risk of fire Do not block areas of ventilation.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Features 3 Features n n n n n n n n n n Power distributor and voltage stabilizer microprocessor controlled toroidal autoformer 1 × Power Twist socket type TR1 for mains connection 4 × protective contact socket (F-type) for the power supply of further units 4 × overload protection (10 A) of the protective contact socket Safety shutdown at 265 V Display of voltage and current values (switchable) USB interface for loading and operating mobile devices (no data exchange) 19" rack-mountable (2 RU) Mains power
Connections and controls 4 Connections and controls Front panel power conditioner 14
Connections and controls 1 Main switch 2 [USB CHARGER] USB 2.0 port for charging and operating mobile devices. This port is not usable for data transmission. 3 Display 4 [LINE VOLTAGE/CURRENT] Button for switching voltage and current value display. By default, the voltage value is displayed. Press the button to display the current value. Press the button again to display the voltage value.
Connections and controls Display 5 Indicator ‘PROTECTION OK’ The indicator lights up green as long as the maximum load (10 A) is not exceeded. The indicator turns off when the maximum load (10 A) is exceeded. The overload protection triggers and locks off all outputs for the power supply. 6 Voltage and current value display 7 Indicator ‘VOLTAGE RANGE’ The indicator lights green when the input voltage is in the normal range. (190 – 253 V ). The indicator flashes when the input voltage drops below 180 V .
Connections and controls Rear panel Power Conditioner 12 17
Connections and controls 9 [OUTLET 1] … [OUTLET 4] Outputs for the power supply of further units, designed as protective contact sockets (F-type) 10 [10 A] Overload protection (10 A) of the protective contact sockets If the maximum load (10 A) is exceeded, the overload protection triggers and locks off all outputs for the power supply.
Technical specifications 5 Technical specifications Input connections Output connections Voltage supply 1 × Power Twist socket (TR1-type) USB port 1 × USB 2.0 Power supply for further devices 4 × protective contact socket (F-type) Operating range 190 V – 253 V Operating supply voltage 230 V Mounting properties 19 inch, 2 RU Dimensions (W × H × D) 483 mm × 88 mm × 400 mm Weight 15.
Technical specifications Further information Total load 16 A Lamp connection No Voltage display LCD power conditioner 20
Protecting the environment 6 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes power conditioner 22
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
