FAQ

No. Cleaning up STARLIKE® is easy. The level of effort required is even lower than a cement-based grout. Unlike other epoxy
grout, you can start cleaning immediately after grouting with STARLIKE®.
Do I need any cleaning additive to my wash water when installing STARLIKE®?
No. Cleaning additives are not required for your initial or final cleaning. Just use the Tile Doctor White Pad and plain water,
plenty of water.
How long does it take for STARLIKE® to fully cure?
STARLIKE® develops its full hardness in typical installation environments over five days.
How long does Starlike® need to cure before it can be walk on or exposed to water?
The workability and hardening time of the product is greatly influenced by the environmental temperature.
The grouted material will be well hardened after 24 hours from application and it can be used even if the complete curing chemical reac-
tion will take 5 total days, before final completion under standard room temperature conditions. During this time, a floor can be walked
upon or a shower can be used without problem, but the performances of stain, UV and chemical resistance, strength, etc. are not fully
accomplished. Please assure during this time that the used of the grouted surface is as light as possible and pay attention not to spill
staining substances such as Wine, Coffee, Mustard, Chemicals, etc. on the surface or Hair Coloring or colored soaps in a shower. Swim-
ming pool should be filled with water after 5 days of application under standard temperature condition.
At what temperature can STARLIKE® be installed?
STARLIKE® is designed to be installed at temperatures between 55°F and 85°F.
Can STARLIKE® be installed outdoors during inclement weather?
If inclement weather is expected, protect the area where STARLIKE® is being or has been installed. To guard against rain or
moisture, tent the area at least 48 inches above the floor, not in contact with the fresh grout allowing plenty of air
circulation.
Can STARLIKE® be covered on a job site once applied?
STARLIKE® can be covered on a jobsite, but it must be done not in contact with the fresh grout, but at a distance of at least
48” by “tenting.
How will temperature and humidity impact curing time for STARLIKE®?
Warmer and drier weather will decrease the amount of time needed to cure whereas cooler and more humid environments
will extend the cure time.