TDS

3
Products to grout and clean
www.litokol.it
WARNINGS
• If possible, apply the product at temperatures between +18°C
and +23°C.
Do not use at low temperatures or in environment with high
humidity, in order to avoid the superficial carbonation that may
modify the uniformity of the colour.
• Remove excess product from the tile surface rapidly because
once hardened it will have to be removed mechanically, seriously
jeopardising the finished result.
• Mix the two components ( A+B) correctly.
• While cleaning change frequently the water.
• Change the felt and the sponge when they are impregnated with
resin.
• Don’t walk on the just grouted surface so as not to stain the floor
with epoxy resin.
• Do not cover the grouted surface with length of cloth or other
materials to avoid the condensation that may cause the superficial
carbonation of the product with the resulting non-homogeneity of
the colour.
• Do not use for grouting Tuscan terracotta or other materials and
porous manufactured products like cementitious riddles.
• In case of grouting natural stones, it is necessary to execute a
preliminary test, in order to verify the absorption of resin by the
stone slabs.
In case of the resin absorption, the dark stains may form on the
sides and on the surface of the slabs and they can’t be removed.
This problem is usual for marbles of light colours.
• The product must not be used for grouting tanks containing
aggressive substances with which only occasional contact is
permitted (see chemical resistance table).
• Do not mix the product with water or solvents.
• Thin ceramic stoneware obtained through compaction and with
structured faux wood surfaces can present problems for the
removal of halos. In these cases, it is recommended to perform a
preventive sample application or consult the Litokol technical
office.
• For the maintenance and cleaning of grouted surfaces with
Starlike®, we do not recommend the use of bleach. If bleach is not
properly diluted and well rinsed, it can lead to a yellowing of the
grouting and this could be visible especially on light colors.
• Do not use for applications not stated on this technical sheet.
IDENTIFICATION DATA
Appearance
Part A: thick coloured paste
Part B: thick liquid
Colours
CLASSIC COLLECTION
GLAMOUR COLLECTION
METALLIC COLLECTION
Bianco Assoluto C.470
Azzurro Pastello C.530
Platinum
Bianco Ghiaccio C.270
Turchese C.400
Shining Gold
Titanio C.310
Artic Blu C.390
Copper
Grigio Seta C.320
Zaffiro C.260
Rusty
Silver C. 220
Verde Salvia C.540
Bronze
Grigio Portland C.560
Verde Pino C.550
Ardesia C.480
Mela C. 410
Antracite C.240
Lime C. 440
Moka C. 420
Limone C.430
Pietra d’Assisi C. 300
Arancio C.460
Grigio Fango C. 280
Rosso Oriente C.450
Tortora C.490
Melanzana C.360
Sabbia C.250
Ciclamino C. 370
Travertino C.290
Lilla C. 380
Avorio C.520
Corallo C.230
Customs code
35069190
Shelf life
24 months in original packaging in dry place