SDS

PAGE 3 of 5
Appropriate engineering controls: If needed use local exhaust ventilation to keep dust concentration bellow limits cited
in this Section.
Personal Protective Equipment
Respiratory Protection:. Use a properly fitted particulate filter respirator complying with an approved standard if a risk
assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product, and the safe working limits of the selected respirator. Wear a respirator conforming to EN140
with type A/P2 filter or better.
Eye/Face protection: Wear appropriate chemical safety glasses/goggles.
Hand/Skin Protection: Wear appropriate protective gloves and clothing.
General Hygiene Considerations: Do not eat, drink or smoke when using this product. Wash hands thoroughly after
handing.
9 – PHYSICAL / CHEMICAL PROPERITES
Appearance: A free flowing powder.
Physical State: solid
Color: Brown
Odor: odorless
pH: 7.0-11.0
Melting Point: NA
Boiling Point: NA
Flash point: Not applicable
Flammibility (solid,gas): Not flammable
Explosive Properties: Not explosive
Vapor Pressure: Not applicable
Vapor Density (AIR=1): Not applicable
Density: 1.8~2.8 g / cm3
Solubility in water: Insoluble
Partition Coefficient (n-octanol/water): NOT APPLICABLE
Auto-ignition temperature: Not applicable
Viscosity: Not applicable
10 – STABILITY and REACTIVITY
Reactivity: No hazardous reaction known under normal conditions of use
Chemical Stability: Stable under normal conditions
Hazardous Reactions: Stable under normal conditions
Conditions to avoid: NA
Incompatible materials: no known incompatible materials
Hazardous Decomposition.: na
11 – TOXICOLOGICAL INFORMATION
Acute Toxicity: None
Acute Oral Toxicity: LD50
Species: rat
Value: > 2,000 mg/kg
The product has not been tested. The statement has been derived from the properties of the individual components.
Irritation / corrosion
Acute Inhalation Toxicity: Based on available data the classification criteria are not met