Owner Manual

Turn the Seat Cushion (2)

upside down and align the

hole position of the Armrest

(3)*1(L)*1(R) with the

pre-drilled hole position

under the Seat Cushion.

Attach the Armrest (3)*1(L)*1(R)

to the Seat Cushion (2) with Six

Bolts (12), using the Wrench (13).

All bolts do not need to be tightened,

they only need to be fixed in half.

Attach the Backrest (1) to the

Armrest (3)*1(L)*1(R), Use the

Wrench (13) to screw Four Bolts

(11) on the left and right sides

of the armrest to fix the back.

All bolts do not need to be

tightened,they only need to be

fixed in a half.

Note 1: The "Front" mark on the Armrests and the "Front" mark on the

Seat Cushion should be in the same direction.

Note 2: Armrests are labeled with an "L" (left) or "R" (right) to show which

side they should be placed on.

Step 4:

Step 3:

(12)×3

50%

(2)

(3)

(1)

(11)×2

50%