User Manual

P.12
18
Canopy
d3 x D7mm Washer
PWA2.3x8mm Screw
4
4
d1.5 x D6.5 mm
Silicon Grommet
PM3x16mm Screw
2
PM3x16mm
d3 x D7mm
Washer
Pilot
First insert the grommet to the canopy then apply screw.
3
19
Cowling & Spinner
d3 x D7mm Washer
5
PA3x12mm Screw
5
5
d2.5 x D8.5 mm
Silicon Grommet
Spinner
Ø89mm
First insert the grommet to the cowling then apply screw.
1.5mm
17
Outer Wing Cabanes
d3 x D7mm Washer
16
PM3x18mm Screw
8
M3 Nylon Insert Lock Nut
8
1.5mm
Outer wing cabane
should fit to the outside
of outer wing cabane
mounts.
Decals
d1.5xD6.5mm
Silicon Grommet
PWA2.3x8mm
d3xD7mm Washer
d2.5xD8.5mm
Silicon Grommet
PA3x12mm
With the wing incidence
angle template still in place,
position the side cabanes,
mark and drill the side
cabane mounts and fasten
with PM3x18mm screw and
nut.
PM3x18mm
d3 x D7mm
Washer
d3 x D7mm
Washer
M3 Nylon Insert
Lock Nut
3mm
Plywood
3x330x388mm
2