Operation Manual

Continuous valve actuator CHEOPS control
theben
As of: Jul-11 (Subject to change without notice) Page 32 of 71
3.4.8 Operating mode
Table 18
Designation
Values
Meaning
Objects to select operating
mode
New: Operating mode,
presence, window state
Old: Comfort, night, frost
Cheops control can also
respond to window and
presence contact.
Conventional setting
Operating mode after
download of application
Frost protection
Night reduction
Standby
Comfort
Operating mode after start-up,
re-programming or return of
bus voltage
Type of presence sensor
(on Obj. 4 or Ext. interface)
Presence detector
Push button
The presence sensor activates
comfort mode
Comfort mode as long as
presence is detected
1. The presence object is
reset on change of
operating mode
definition object
(Object 3).
2. If the presence object
is set during night
operation, it is reset
after the configured
comfort extension
finishes (see below).
Comfort extension during
night operation
(with presence key)
Comfort mode extension via
red push button in night mode
None
30 min
1 hour
1,5 hours
2 hours
2,5 hours
3 hours
3.5 hours
Party switching:
enables the red key or
presence key to switch
Cheops control from night to
comfort mode for a certain
period.