Operation Manual

Continuous valve actuator CHEOPS control
theben
As of: Jul-11 (Subject to change without notice) Page 39 of 71
3.4.11 Linear characteristic valve curve
This setting should be used only for valves described exclusively as linear.
Note: The values can be shown but not changed in this table.
Table 21
Designation
Values
Meaning
Valve position in % for 10%
volume flow (1..99)
10
At 10% valve stroke, a
volumetric flow of 10% is
reached, at 20%, a volumetric
flow of 20% is reached etc.
Valve position in % for 20 %
volume flow (1..99)
20
Valve position in % for 30 %
volume flow (1..99)
30
Valve position in % for 40 %
volume flow (1..99)
40
Valve position in % for 50 %
volume flow (1..99)
50
Valve position in % for 60 %
volume flow (1..99)
60
Valve position in % for 70 %
volume flow (1..99)
70
Valve position in % for 80 %
volume flow (1..99)
80
Valve position in % for 90 %
volume flow (1..99)
90