Operation Manual

Continuous valve actuator CHEOPS control
theben
As of: Jul-11 (Subject to change without notice) Page 46 of 71
4.3 Site function
While the unit remains in the delivered condition, i.e. no further applications have been
downloaded, Cheops control functions in field mode.
This function enables Cheops control to be used immediately on site with basic functions.
The set point temperature can be selected directly on the device using the red (+) and blue (-)
keys.
There are 5 set point temperature values available. The selected temperature is indicated on
the LEDs as follows.
22°C
20°C
18°C
16°C
5°C
This enables Cheops control to automatically control the room temperature during the period
between assembly and start-up by an EIB specialist.
The ETS database can be found on our download page: http://www.theben.de/downloads.htm.