307108 EN Time switch TR 608 top2 S 6080101 TR 609 top2 S 6090101 1. Basic safety information 2. Proper use 4 4 Disposal 4 3. Installation and connection 5 Mounting the time switch 5 Connecting the cable 7 Disconnecting the cable 7 4.
Overview of navigation menu 11 Initial operation 5.
Resetting the time switch 6. Technical data 7.
1.
3.
45° cable OBELISK top2 memory card (9070404) Plug-in screwless terminal NC contact Test tap Mount on DIN top hat rails (as defined in EN 60715) Switched voltage-free Ensure device cannot be switched on Check absence of voltage Earth and bypass Cover or shield any adjacent live components 6
Connecting the cable Wiring diagrams 6080101 / 6090101 L N L N C1 2 1 2 1 N L L max. 100 m Ext 3 N L L Strip cable to 8 mm (max.
4.
Display & buttons Programmed switching times Date display Channel status ON = On OFF = Off MENU – Activate display – Open menu – Cancel menu – ESC (leave menu) 50-60Hz 2 R10a -25T 16(4)A 250VAC µ 1 Time display TR 608 top2 AM PM C1 C C2 Display of the active buttons with the relevant function MENU OK Days of the week from 1 to 7 OK – Save selection – Confirm selection Options 3 are displayed 9
Operating instructions 1. Read text line text/symbol represents query 2.
Overview of navigation menu MENU PROGRAM TIME/DATE u NEW u TIME CHECK SET DATE MODIFY SU-WI DELETE WEEK DAY END FORM DATE FORM TIME END u u MANUAL PERM ON u OPTIONS END OPERATING HOUR PERM OFF EXT INPUT* OVERR ON LANGUAGE TIMER* HOLIDAY RANDOM* END PIN FACTORY SETTINGS INFO END 11
Initial operation MENU ENGLISH u DEUTSCH RETAIN PROGRAM u DELETE PROGRAM ESPANOL FRANCAIS FORM DATE YEAR MONTH DAY FORM TIME HOUR ...
5. Settings and functions Set switching time MENU PROGRAM u NEW SWITCH u CHECK PULSE* u u MEM FREE 84 ON MODIFY HOUR DELETE END MINUTE MONDAY COPY ADD TUESDAY SAVE SAVE Copy switching to other days of the week.
Press MENU Select PROGRAM and press OK to confirm Select NEW and press OK to confirm Select SWITCH, confirm by pressing OK Select ON (for turn-on times), confirm with OK Set required turn-on time (Mo–Fr, 7:30), confirm with OK Select COPY, confirm with OK ADD TUESDAY is displayed, confirm by pressing OK and also confirm the days We, Th, Fr by pressing OK. Continue with until SAVE is displayed. Confirm by pressing OK.
LLYou can either change or delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time Change individual switching times Press MENU Select PROGRAM and press OK to confirm Select CHANGE, confirm by pressing OK Select SWITCH, confirm by pressing OK (only with TR 609 top2 S) Select day, confirm with OK MODIFY HOUR, use the + or – buttons to change hour and minute and confirm with OK.
LLYou can either delete a block, i.e. a switching time copied for several days (e.g. Mon-Fri) or a single switching time Press MENU. Select PROGRAM and confirm with OK Select DELETE, confirm with OK Select SWITCH, confirm with OK (only with TR 609 top2 S) MONDAY is displayed, confirm with OK Select DELETE BLOCK, confirm with OK With DELETE MONDAY etc. individual days can also be cleared.
Pulse programming (only with TR 609 top2 S) MENU u NEW u CHECK PULSE* u CYCLE* u PROGRAMM minutes MEM FREE 84 MODIFY ON DELETE HOUR END MINUTE SECONDS PULSE LENGTH PULSE LENGTH sec.
Press MENU Select PROGRAM, confirm with OK Select NEW, confirm with OK With select PULSE, confirm with OK Select ON, confirm with OK Use the + or – buttons to enter hour, minute, second (8:05) and confirm with OK Use the + or – buttons to enter the duration of the pulse in minutes and seconds (5 sec) and confirm with OK. MONDAY is displayed.
LLObserve the number of maximum electrical switching cycles when using the cycle function. MENU PROGRAMM u NEW u CHECK CYCLE* u SWITCH* u MEM FREE 84 MODIFY START CYCLE DELETE HOUR END MINUTE MONDAY PULSE LENGTH PAUSE WITH END ENDLESS STOP CYCLE HOUR ...
Press MENU Select PROGRAM, confirm with OK Select NEW, confirm with OK With select CYCLE, confirm with OK START CYCLE is displayed, confirm with OK Use the + or – buttons to enter hour, minute, day (8:00 hrs Monday) and confirm with OK Enter PULSE LENGTH (20 s), confirm with OK Enter pause duration PAUSE (14 min and 40 s), confirm with OK Select WITH END, confirm with OK STOP CYCLE is displayed, confirm with OK Enter end times of the cycle (20:30 hrs) and confirm with
Setting holiday function MENU MANUELL PERM ON PERM OFF OVERRI ON TIMER HOLIDAY RANDOM END u ON BEGINN HOLIDAY ... END HOLIDAY ...
Activating PIN code The PIN code is set in OPTIONS via the menu. LLIf you have forgotten your PIN, call the Theben Hotline. LLHave the serial number ready MENU OPTIONS u OPERATING HOURS EXT INPUT LANGUAGE PIN u FACTORY SETTING INFO END NO PIN WITH PIN u CURRENT PIN NEW PIN 00:00 Setting manual or permanent switching Manual or permanent switching can be set via the menu in MANUAL or (in the automatic screen) by button combination (see picture).
••Permanent switching: As long as a permanent switching (on or off) is activated, the programmed switching times are ineffective Activating manual control Briefly press both buttons simultaneously Activating permanent switching Press both buttons simultaneously for 2 seconds Cancelling manual/permanent switching Press both buttons simultaneously Set external input For the channel, an EXTERNAL INPUT (see figure) can be set with different functions.
MENU OPTIONS OPERATING HOURS EXT INPUT u LANGUAGE BUTTON NOT ACTIVE PIN u OVERRIDE TIMER SWITCH FACTORY SETTING INFO END Press MENU, with select EXT INPUT and follow the indi- cations on the display. Hour counter The operating hours of the channel (relay) are displayed and deleted in the OPTIONS menu. If the number of operating hours exceeds the value set in the Service menu, SERVICE will appear in the display. Example: Replace a lamp after after 5,000 h.
Using the OBELISK top2 memory card All functions can also be set on the PC using the OBELISK software and transferred to the device via the memory card. Insert memory card in the time switch Read in/out saved switching times and device setups in the time switch or start Obelisk program Remove memory card after copying etc. !!Avoid mechanical overload and contamination during storage/transport LLPC software OBELISK top2 available at www.theben.
Copying TIME →OBELISK This copies all switch programmes and settings from the time switch to the memory card. Starting OBELISK program Takes on the switching times that are programmed on the memory card. As soon as the memory card is removed, the switching times of the time switch are re-activated.
6. Technical data Operating voltage: Frequency: Standby: Max switching capacity: switching capacity: Min.
LED lamps (<2 W): TR 608 top2 S TR 609 top2 S LED lamps (>2 W < 8 W): TR 608 top2 S TR 609 top2 S LED lamps (>8 W): TR 608 top2 S TR 609 top2 S SELV switching is not permitted. Switching of any external conductor is permitted. 6W 55 W 20 W 180 W 24 W 220 W 7. Contact Theben AG Hohenbergstr. 32 72401 Haigerloch GERMANY Tel. +49 7474 692-0 Fax +49 7474 692-150 Hotline Tel. +49 7474 692-369 hotline@theben.de Addresses, telephone numbers etc. www.theben.
