Owner's Manual

Other Settings and Options

Programing

Adding or removing frequencies and programing has be locked out of this model even with

programing software to comply with FCC regulations.

GMRS channels 015 – 030 are programed to transmit and receive. All other loaded frequencies

are receive only. See the frequency chart for more information.

Keypad Lock-out

Hold the microphone “#” for 2-3 seconds to turn on / off the keypad lock-out. Once locked a

lock icon appears in the radio menu bar.

PTT ID

Requires programing software to change the PTT ID code. Refer to Function menu to display

PTT ID.

Scanning Modes

The scanner is configurable to one of three ways of operation: Time, carrier or search, each of

which is explained in further details in their respective section below.

1. Press the (Menu) key to enter the menu.

2. Enter “17” on your numeric keypad to come to scanner mode.

3. Press the (Menu) key to select.

4. Use the and (UP ↑) and (DOWN ↓) keys to select scanning mode.

5. Press the (MENU) key to confirm and save.

6. Press the (EXIT/AB) key to exit the menu.

See the function menu for the different scanning mode options and how each function operates.

GMRS Repeaters

Memory channels 23 – 30 contain GMRS repeater channels. These channels should be operated

with permission form your local repeater operators.

For more local information seek out your local frequency coordinator.

http://www.sbe.org/sections/freq_local.php