Full Product Manual

5
MPS TOUCHVIEW
TM
3.0 USER MANUAL
GET TO KNOW THE HOME SCREEN, THIS IS THE MAIN SCREEN IN
WHICH YOU CAN DO ALMOST EVERYTHING FROM THIS HERE!
HOME SCREEN
. LIGHT CONTROL
In the upper right hand corner of the screen and every other screen you will see this button which controls the interior light.
Pressing the arrows on either side will either brighten or dim the light.
. QUICK START/SPECTRAWAVE/MPS OPTIONS BUTTONS
Touch the Quick Start button and the TheraSauna
TM
turns on at 100% TheraMitter
TM
function.
Quick Start is used after setting the temperature and session time, and will remain on the Home Screen during session.
Adjusting temperature and session duration can be accomplished during the entire Quick Start session as well as choosing to
operate in SpectraWave® or MPS® mode. On screen you can set your timer and your temperature for the session. You can also
control the SpectraWave® or MPS® modes for the session, in the same way as you can for the Quick Start option.
. AUTO RUN  AND  OPTION
When you have set up the Auto Run 1 Program or Auto Run 2 (in the Settings Screen) press each user name to activate that
program. When activated the screen will turn brown. If you do not wish to run this program after you have started, touch on the
screen and it will become unhighlighted (as shown in user 1 above).
. SETTINGS BUTTON
Allows you to set Temperature, Date and Time, Sound Therapy, Preheat Mode and Auto Run Program settings. You can also
adjust the screen dimming feature from “O or up to 60 minutes”. ONLY DIMS AFTER PROGRAM SHUTS OFF.
. HELP BUTTON
When you press the help button it will take you to the Help Screen.
HOME SCREEN
PLEASE NOTE: BE SURE TO OPERATE YOUR SAUNA WITH DOOR OPEN FOR 1 HOUR BEFORE USING.
ROTATING LOGOS ARE DISPLAYED HERE.
1
2
3
4
5
TIME AND DATE
DISPLAYED HERE.
CURRENT USER IN
AUTO RUN SESSION
SET TEMP AND SESSION LENGTH HERE BY TAPPING WHITE ARROWS.
USER 
USER 