Full Product Manual
19
MPS Setup Screen
SET UP CLOCK
See page 3.
SET UP MPS (From Setup Screen)
(MPS = Micron Power Select) (Screen shown above)
On the left side of the screen, you should see a graphic image of your sauna. The
circled numbers represent each heater zone in the sauna. These numbers will
correspond with the zone numbers on the right side of the screen. To adjust the micron
level of each zone from 100% (highest) to 7% (lowest) touch the + (plus) sign to
increase, - (minus) sign to decrease.
After adjusting ALL of your sauna’s zones, you must touch the SAVE pad on the
screen to save the settings. Touching this option will return you to the HOME screen.
To return back to the SETUP screen, touch the SETTINGS option on the HOME
screen.
RESET (From Setup Screen)
This option if pressed on the screen will reset your settings back to the factory default
settings. The clock WILL NOT reset.