Full Product Manual

SET UP AUTO 1 & AUTO 2

Set Up Auto 1 & Auto 2 – (From SETUP Screen)

In this screen option, you can program your TheraSauna® start times for each seven

days of the week, with the same or different times. You can only program one (1) start

time per day in each Auto Run program.

On the left side of the screen you will see 5 categories to choose from. Touch the

category you want to set beginning with the “Day:” Then use the + (plus) or – (minus)

signs on the value pad to adjust. Continue down with each of the five options.

For each programed day, highlight the corresponding button for that day (Mon), (Tu),

etc. This activates the day to turn on for the day already programed. (The day buttons

have nothing to do with programming, they are simply on & off buttons)

Remember – EACH DAY MUST BE PROGRAMED SEPARATELY. As you move

from (Mon) to (Tues) with the value +/- buttons, the screen settings will revert to

default settings and are ready to program the next day to be programed.

You MUST touch the SAVE button to save the entire weeks settings. This also will

return you to the HOME screen. When back at HOME screen, you must touch the

AUTO RUN 1 or 2 pad to activate the program to run. When activated, this pad will

turn green.

RESET –

The reset pad in the Auto Run Program will reset your settings back to the last saved

settings.

*NOTE: If you do not want the Auto Run program to run on a certain day touch that

days pad and it will go from green (on) to grey (off) then touch SAVE to keep the

change.

HOME will always take you to the HOME screen but will not save any information.

HOME also shuts sauna off.