- Ultra-Aire 150H Whole House Ventilating Dehumidifier

INSTRUCTIONS FOR APPLYING
THE INSULATION TO THE UA-150H
The UA-150H must be clean, dry and at room temperature to apply
the insulation kit. The insulation has a pressure sensitive adhesive
with release paper applied to one side. To apply the insulation,
remove the release paper and press the sheet firmly against the
UA-150H. Apply insulation before installing the UA-150H if possible,
as this is the easiest time to install the insulation kit.
Install the insulation kit as shown in the illustration below. After
installing the insulation, cut out the holes for the supply and return
connections and cut the seam around the removable front cover so
it can be removed easily. If more insulation is needed two or more
insulation kits may be applied to a single UA-150H.
EXTERNAL INSULATION KIT: UA-150H
25
Ultra-Aire 150H Installer’s & Owner’s Manual
The dimensions below each location represent the size of the individual insulation pieces.