COMP 10 Frame Parts Jambs............................................................................................................................................................10.3 Head Jambs..................................................................................................................................................10.4 Arch & Radius Head Jambs.........................................................................................................................10.5 Head Jambs.....
Frame Parts 10.
Jambs 4 9/16" 3/4" 1 1/4" 2 3/16" 1/2" 1/2" Weather Strip Cutout 4-9/16" Jambs 5 1/4" 3/4" 1 1/4" 1/2" 2 3/16" 1/2" Weather Strip Cutout 5-1/4" Jambs 6 9/16" Frame Parts 3/4" 1 1/4" 2 3/16" 1/2" 1/2" Weather Strip Cutout 6-9/16" Jambs 6 9/16" 3/4" 1 1/4" 2 3/16" Weather Strip Cutout 1/2" 1/2" 6-9/16" Patio Jambs (for sliding screens) Comp 10 2014 (BOOK SIZE) 10.
Head Jambs UNIT SIZE 10" SIDELITE 12" SIDELITE 14" SIDELITE 2/0 SIDELITE 2/0 DOOR 2/4 DOOR 2/6 DOOR 2/8 DOOR 2/10 DOOR 3/0 DOOR 3/6 DOOR 4/0 FRENCH 7/8" ASTRAGAL 4/8 FRENCH 7/8" ASTRAGAL 5/0 FRENCH 7/8" ASTRAGAL 5/4 FRENCH 7/8" ASTRAGAL 5/8 FRENCH 7/8" ASTRAGAL 6/0 FRENCH 7/8" ASTRAGAL 7/0 FRENCH 7/8" ASTRAGAL LENGTH "A" 10.000 12.000 14.000 24.000 24.156 28.156 30.156 32.156 34.156 36.156 42.156 49.062 57.062 61.062 65.062 69.062 73.062 85.062 Head Jamb “A” Frame Parts 10.
Arch & Radius Head Jambs .750" C B .875" A 1.114" for 3/0 1.085" for 3/6 C B A .500" UNIT SIZE 3/0 RADIUS 3/6 RADIUS 3/0 ARCH 3/6 ARCH Comp 10 LENGTH "A" 35.160" 41.156" 36.156" 42.156" RADIUS "B" 17.580" 20.578" 28.486" 39.751" Frame Parts HEIGHT "C" 19.830" 22.828" 7.320" 6.991" 2014 (BOOK SIZE) 10.
Head Jambs Inswing Active Left Shown Flush with Door Rabbet C = Door (Active) R 0.250” (2) 1.359” 2.020” 10.6 R 0.250” (2) R 0.250” (2) 1.234” 2.
Head Jambs B B C A R .250 (2) R .250 (2) R .250 (2) 1.234” 1.359” .906” 2.
Head Jambs Flush with door rabbet C = Door (Active) 2.520” SINGLE WITH 1 VENTING SIDELITE R 0.250” (2) 1.359” Code W B R .250 (2) FRENCH "WIDE MULLION" STANDARD DOOR SINGLE 2.520” Code W 10.8 A CONTINUOUS - 1 VENTING SIDELITE (MACHINING CODE V) (MACHINING CODE W) A B C 2/4 L(R) W/1-12" VENTING SL 41.877 11.677 27.680 2/4 L(R) W/1-14" VENTING SL 43.877 13.677 2/6 L(R) W/1-12" VENTING SL 43.877 11.677 29.680 2/6 L(R) W/1-14" VENTING SL 45.877 13.677 2/8 L(R) W/1-12" VENTING SL 45.877 11.677 31.
Head Jambs B (Right Active) B (Left Active) A 3/32” R.125” (8) Detail Cut Through 7/8" ASTRAGAL R.250” (2) FRENCH DOOR WITH MULTIPOINT LOCK A B 407 = 4/0 DOUBLE ASTRAGAL 49.062 21.755 487 = 4/8 DOUBLE ASTRAGAL 57.062 25.755 507 = 5/0 DOUBLE ASTRAGAL 61.062 27.755 547 = 5/4 DOUBLE ASTRAGAL 65.062 29.755 587 = 5/8 DOUBLE ASTRAGAL 69.062 31.755 607 = 6/0 DOUBLE ASTRAGAL 73.062 33.755 707 = 7/0 DOUBLE ASTRAGAL 85.062 39.755 .693” 2.375” .822” .801” .750” R.125 (8) Detail Cut Through R .250” (2) 3.
Head Jambs A C B B G (Left Active) G (Right Active) MPLS FRENCH W/2 VENTING SIDELITES 3/32” R 0.125” (8) Detail Cut Through R 0.250” (2) R 0.250” (2) 2.520” 2.375” 1.359” 0.688” 0.828” 1.313” 0.750” 3.750” 1.250” 0.375” 0.250” 7/8" ASTRAGAL STANDARD DOORS Frame Parts 10.10 487W12 = 487W14 = 507W12 = 507W14 = 547W12 = 547W14 = 587W12 = 587W14 = 607W12 = 607W14 = 4/8 FR. 4/8 FR. 5/0 FR. 5/0 FR. 5/4 FR. 5/4 FR. 5/8 FR. 5/8 FR. 6/0 FR. 6/0 FR.
Side Jambs Head End UNIT SIZE Head Gain See Chart Overall See Chart 6° 6/6 6/8 7/0 8/0 6/8 3/0 ARCH 6/8 3/6 ARCH 8/0 3/0 ARCH 8/0 3/6 ARCH 6/8 3/0 RADIUS 6/8 3/6 RADIUS 8/0 3/0 RADIUS 8/0 3/6 RADIUS LENGTH HEAD GAIN "A" "B" 79.483" 1.250" 82.031" 1.250" 86.031" 1.250" 98.031" 1.250" 76.281" 1.570" 76.531" 1.491" 92.281" 1.570" 92.531" 1.491" 62.201" 59.201" See Figure Below 78.201" 75.201" Frame Parts Sill End Radius Head Gain Detail 3/4" 5/16" Comp 10 2014 (BOOK SIZE) 10.
Side Jambs ADJUSTABLE STANDARD HINGE HINGE (MACHINING (MACHINING CODES 4, 5) CODE A) STANDARD STANDARD Hinge 1 HINGE MORTISE LOCATIONS UNIT SIZE HINGE [1] HINGE [2] HINGE [3] HINGE [4] 6/6 6/8 9.219 38.469 67.719 N/A 7/0 8/0 6.094 31.594 57.094 82.594 Hinge 2 6/6 6/8 7/0 9.400 38.650 67.900 N/A 8/0 6.306 31.806 57.306 82.806 Hinge 3 Hinge 4 Frame Parts R .625 or R.250 Jamb stop 4.015” .728” .092” Deep Standard Hinge Jamb stop 8/0 Jamb Shown R .250 R .625 3.654” .135” Deep .
STD. STD. ARCH RADIUS SIDE SIDE JAMB JAMB Side Jambs HINGE MORTISE LOCATIONS UNIT HEIGHT UNIT WIDTH HINGE 1 HINGE 2 HINGE 3 6/8 10.278 37.718 65.156 3/0 OR 3/6 8/0 11.391 34.641 57.891 3/0 10.281 33.406 56.530 6/8 3/6 9.280 31.406 53.530 3/0 31.780 52.155 11.405 8/0 3/6 30.780 50.155 HINGE 4 N/A 81.141 N/A 72.530 69.530 Hinge 4 (For doors over 7/0.) R .625” or R.250” Jamb stop .728” Hinge 3 4.015” .092” Deep Frame Parts Hinge 2 Hinge 1 8/0 Jamb Shown Comp 10 2014 (BOOK SIZE) 10.
STANDARD Side Jambs MACHINING CODE ‐ J, K, L UNIT SIZE STRIKE 6/6 44.844 6/8 7/0 48.844 8/0 60.844 OPTIONAL Lock Center STANDARD STANDARD ARCH SIDE RADIUS JAMB SIDE JAMB DISTANCE MACHINING CODE ‐ J, K, L UNIT HEIGHT UNIT WIDTH STRIKE 3/0 39.079 6/8 3/6 39.329 3/0 55.094 8/0 3/6 55.344 3/0 25.000 6/8 3/6 22.000 3/0 41.000 8/0 3/6 38.000 Frame Parts .562 .536 R .250 O 1.000 THRU O 1.000 R .250 THRU 1.133 1.133 2.266 2.266 .094 .094 .728 .702 1.
Side Jambs Tongue 1.016 .841 .651 Strike .841 .651 Tongue [1] .892 1.304 1.016 .147 4.923 Strike 4.641 2.608 2.856 .773 .182 2.608 8.835 .809 2.608 Tongue [2] FULL R 2.856 FULL R R .312 FULL R FULL R FULL R 2.856 .105 DEEP Frame Parts .062 DEEP .062 DEEP .105 DEEP Mark for Pocket Lock Mortises Comp 10 STANDARD POCKET STRIKE (MACHINING CODE P) Manual Pocket - Side Jamb Lock Mortise Locations UNIT SIZE STRIKE TONGUE 1 TONGUE 2 6/6 40.851 12.585 68.254 6/8 40.851 12.
Mullions 2 1/2" 2" 3 9/16" 3 9/16" 2 3/16" 2 3/16" 1" Oak, Pine, and Rot-Resistant Standard & Wide Mullion 1/2" 1/2" 1 1/2" 1/2" 1/2" 2" 3/8" 1/2" Cut-Back 2 1/2" 15/16" 13/16" 1/2" 1/2" 4 3/8" Frame Parts 4 3/8" 2 3/16" Patio Standard & Wide Mullion 2 3/16" (Must be used with all screen applications) 1" 1 1/2" 1/2" 1/2" Sill End Details Composite Outswing (Patio Mullion Must Be Used) 10.
Mullions R .625 or R .250 STANDARD STANDARD ADJUSTABLE STANDARD HINGE HINGE (MACHINING (MACHINING CODE A) CODE 4, 5) Hinge Mortise Locations HINGE MORTISE LOCATIONS UNIT SIZE HINGE [1] HINGE [2] HINGE [3] HINGE [4] 6/6 8.469 37.719 66.969 N/A 6/8 7/0 8/0 5.344 30.844 56.344 81.844 6/6 6/8 7/0 8.650 37.900 67.150 N/A 8/0 5.556 31.056 56.556 82.056 Jamb stop Top of Mullion Hinge [2] Hinge [3] 4.015” .728” Hinge [1] .092” Deep Hinge [4] Frame Parts Standard Hinge Jamb stop R .
Mullions Distance STD. Top of Mullion Standard Lock Mortise location MACHINING CODES J, K, L UNIT SIZE STRIKE 6/6 44.094 6/8 7/0 48.094 60.094 8/0 Lock Center .250 R .250 R x .469” Deep Frame Parts Entry Mullion Shown 1.125” .114” 2.226” .728” .094” Deep 10.
Mullions Top of Mullion Vented Sidelite Lock Mortise Location TONGUE (1) STANDARD TONGUE (2) TONGUE (3) VENTING SIDELITE MPLS SECONDARY MACHINING CODE V UNIT SIZE TONGUE 1 TONGUE 2 TONGUE 3 6/6 3.489 32.989 60.491 6/8 8/0 FULL R 16.489 48.989 76.491 .766” Frame Parts .658” F Right Hand Shown .898” Comp 10 2014 (BOOK SIZE) 1.733” 3.016” 10.
Mullions .105” DEEP 1.304” .062” DEEP 4.923” 2.608” 8.835” TONGUE 1 .651” .147” .809” 2.608” FULL R STRIKE R . 312 1.016” .841” .651” TONGUE 2 .892” 1.016” 2.608” 4.641” .120” Deep .773” .182” 2.856” Frame Parts FULL R FULL R FULL R POCKET STRIKE Manual Tongue & Variable Height Lock Mortise Location 10.20 UNIT SIZE STRIKE TONGUE 1 TONGUE 2 6/6 40.101 11.836 67.506 6/8 40.101 11.836 67.506 7/0 44.101 15.836 71.506 8/0 56.101 10.188 83.
Stainable & Standard Aluminum 7/8" Astragal Standard Lock 7/8" 1/8" Vinyl Cover Deadbolt Boss 5/32" Strike Boss Deadbolt Plate 7/8" Strike Plate #8 x 1-1/2" Screws 1 29/32" Astragal Height (Less Boots) Backing Plate DOOR HEIGHT 6/6 INSWING ASTRAGAL OUTSWING ASTRAGAL OVERALL HEIGHT OVERALL HEIGHT 76.702 76.702 6/8 79.250 79.250 7/0 83.250 83.250 8/0 95.250 95.250 Astragals come complete with the necessary hardware. See COMP 14. Corner Seal Pad Comp 10 2014 (BOOK SIZE) 10.
Stainable & Standard Aluminum 7/8" Astragal Multi-Point Lock Manual Shootbolt 7/8" 1/8" 5/32" Vinyl Cover 7/8" Strike Plate 1 29/32" Frame Parts Astragal Height (Less Boots) #8 x 1-1/2" Screws DOOR HEIGHT 6/6 INSWING ASTRAGAL OUTSWING ASTRAGAL OVERALL HEIGHT OVERALL HEIGHT 76.702 76.702 6/8 79.250 79.250 7/0 83.250 83.250 8/0 95.250 95.250 Astragals come complete with the necessary hardware. See COMP 14. 10.
Coastal Astragal Standard Lock 7/8” 1/8” Vinyl Cover Deadbolt Boss (Removeable) Strike Boss Deadbolt Plate 7/8” 5/32” 1 29/32” Strike Plate Astragal Height (Less Boots) Backing Plate Frame Parts #8 x 2-1/2” Screws DOOR HEIGHT 6/8 8/0 INSWING ASTRAGAL OUTSWING ASTRAGAL OVERALL HEIGHT OVERALL HEIGHT 79.250 79.250 95.250 95.250 Corner Seal Pad Astragals come complete with the necessary hardware. See COMP 14 for individual parts. Comp 10 2014 (BOOK SIZE) 10.
Coastal Astragal Multi-Point Lock Manual Shootbolt 7/8" 1/8" Vinyl Cover 7/8" 5/32" Strike Plate Frame Parts #8 x 1-1/2" Screws 1 29/32" DOOR HEIGHT 6/8 8/0 INSWING ASTRAGAL OUTSWING ASTRAGAL OVERALL HEIGHT OVERALL HEIGHT 79.250 79.250 95.250 95.250 Astragals come complete with the necessary hardware. See COMP 14. 10.
Astragal - Outswing Security Cover 7/8” Aluminum Outswing Astragal Security Cover 7/8” Astragal Active Door Frame Parts Comp 10 2014 (BOOK SIZE) 10.
Brickmould 1-1/4” Brickmould - Wood and Rot-Resistant (WM180 Profile) 2” 1-1/16” Frame Parts 10.
Brickmould Head Length A + 4” Length A Length Comp 10 STANDARD LENGTHS STANDARD LENGTHS STANDARD LENGTHS STANDARD LENGTHS STANDARD MULLION BOXED/WIDE MULLIONS STANDARD MULLION 2/4 W/2-12" 2/4 W/2-14" 2/6 W/2-12" 2/6W/ 2-14" 2/8 W/2-12" 2/8 W/2-14" 2/10 W/2-12" 2/10 W/2-14" 3/0 W/2-12" 3/0 W/2-14" 2/4 W/2-12" 2/4 W/2-14" 2/6 W/2-12" 2/6W/ 2-14" 2/8 W/2-12" 2/8 W/2-14" 2/10 W/2-12" 2/10 W/2-14" 3/0 W/2-12" 3/0 W/2-14" 2/4 W/2-12" 2/4 W/2-14" 2/6 W/2-12" 2/6W/ 2-14" 2/8 W/2-12" 2/8 W/2-14" 2/10 W/2-12" 2/
Brickmould B Length Frame Parts 10.28 STANDARD STANDARD STANDARD STANDARD INSWING UNITS WITH TRANSOMS OUTSWING OUTSWING (TRU(NON-TRUDEFENSE) DEFENSE) INSWING Side Length UNIT SIZE 6/6 6/8 7/0 8/0 6/6 6/8 7/0 8/0 6/6 6/8 7/0 8/0 "B" 78.733 81.281 85.281 97.281 77.546 80.094 84.094 96.094 78.121 80.669 84.669 96.669 6/6 92.202 6/8 94.
Cove Molding & Head Seal Pad 1/2” 7/16” 7/16” 1/2” Sidelite 3/16” Transom 1/8” 5/16” 7/16” High Heat Composite (for outswing applications) RT S Frame Parts Head Jamb Seal Pad 4-9/16” and 6-9/16” Jambs 1-11/16” 4-9/16” 1-11/16” 6-9/16” Comp 10 2014 (BOOK SIZE) 10.
Mull Casing 1-1/16” 1-15/32” Mull Casing - Inswing 1-1/16” 1-7/32” Mull Casing - Outswing Length: Standard = 81-1/4” Transom = 95-3/4” 8/0 Height = 98” Wood Mull Casing Screen Track and Stop Screen Track Base Screen Stop Cover Frame Parts .411” .625” 1.068” Screen Track 10.30 STANDARD DOORS STANDARD DOORS WIDE MULLION STANDARD MULLION SIZE 4/8 5/0 5/4 5/8 6/0 4/8 5/0 5/4 5/8 6/0 "A" OVERALL LENGTH 57.250 61.250 65.250 69.250 73.250 57.750 61.750 65.750 69.750 73.750 2014 (BOOK SIZE) 1.
Direct Set Sidelite Foam Tape 1-17/32” 1-29/32” Bottom Trim Length = 37” Foam Tape Frame Parts 1 /2” 7/16” Direct Set Sidelite Trim Kit Length = 80” or 96” Comp 10 2014 (BOOK SIZE) 10.
Standard Adjusta-Fit© 2 - Inswing Size 2/0 2/4 2/6 2/8 2/10 3/0 3/6 C A 2-3/32” 1-7/8” 5/8” A 27-1/4” 31-1/4” 33-1/4” 35-1/4” 37-1/4” 39-1/4” 45-1/4” C 24-5/32” 28-5/32” 30-5/32” 32-5/32” 34-5/32” 36-5/32” 42-5/32” 1-9/16” 6/8 = 44-3/32” 7/0 = 48-3/32” B 10-1/2” 1-9/16” 5-1/2” Frame Parts 29-1/4” 6/8 = 81-1/8” 7/0 = 85-1/8” 6/8 = 81-1/8” 7/0 = 85-1/8” Frame Width 4”-5” 4-1/2”-5-1/2” 5-1/2”-6-1/2” 6-1/2”-7-1/2” 7-1/2”-8-1/2” 8-1/2”-9-1/2” 29-1/4” 4-1/32” 10.
Standard Adjusta-Fit© 2 Public Access - Inswing/Outswing C A 2-3/32” 1-7/8” 5/8” Size 2/0 2/4 2/6 2/8 2/10 3/0 3/6 A 27-1/4" 31-1/4" 33-1/4" 35-1/4" 37-1/4" 39-1/4" 45-1/4" C 24-5/32" 28-5/32" 30-5/32" 32-5/32" 34-5/32" 36-5/32" 42-5/32" 1-9/16” 6/8 = 44-3/32” 7/0 = 48-3/32” B 10-1/2” 1-9/16” 5-1/2” 29-1/4” 6/8 = 80-1/2” 7/0 = 84-1/2” Frame Parts 6/8 = 80-1/2” 7/0 = 84-1/2” Frame Width 4”-5” 4-1/2”-5-1/2” 5-1/2”-6-1/2” 6-1/2”-7-1/2” 7-1/2”-8-1/2” 8-1/2”-9-1/2” 29-1/4” B 1-1/2” 2” 3” 4” 5”
Standard Adjusta-Fit© 2 - No Sill C A 2-3/32” 1-7/8” Size 2/6 2/8 3/0 3/6 A 33-3/16" 35-3/16" 39-3/16" 45-3/16" C 30-5/32" 32-5/32" 36-5/32" 42-5/32" 5/8” 1-9/16” 6/8 = 44-3/32” 7/0 = 48-3/32” 10-1/2” B 1-9/16” 5-1/2” 29-1/4” 6/8 = 80” 7/0 = 84” 6/8 = 80” 7/0 = 84” Frame Width 4”-5” 4-1/2”-5-1/2” 5-1/2”-6-1/2” 6-1/2”-7-1/2” 7-1/2”-8-1/2” 8-1/2”-9-1/2” 29-1/4” B 1-1/2” 2” 3” 4” 5” 6” 4-1/32” 10.
