Instructions

Finishing Instructions
2.10 2014 SITE 2
Doorlite Frame Finishing
9/5/07
DLLBLTCMSMC
TO REMOVE GLAZING COMPOUND
FINISH FRAME WITHIN TWO WEEKS OF EXPOSURE.
TO FINISH THE FRAME AROUND GLASS
PAINT:
STAIN AND TOPCOAT
:
:
: Therma-Tru Finishing System Kit
Therma-Tru Finishing System Kit
www.thermatru.com 1-877-99-STAIN (997-8246)
Wet with window cleaner or water first. Use razor
blade to score glazing along edge of frame. Holding razor blade at a 45° angle, scrape
glazing from glass. Wipe remaining residue off with window cleaner or mineral spirits.
Clean first with mild detergent and water or
TSP solution. Rinse well and allow to dry.
Prime first with an alkyd- or acrylic-based primer and allow to dry. Then paint with
a high quality, exterior grade, acrylic-latex house paint, OR,
Use a . To order a
, contact your local Therma-Tru dealer, visit us on the
Internet at or call toll free at . See the
Finishing System Instruction brochure or the Corner Tag for more detailed application
information.
only
Door
THERMA-TRU DOORS • Technical Services Department
1750 Indian Wood Circle • Maumee, Ohio 43537 • 1-800-THERMATRU (843-7628) • www.thermatru.com
ASSEMBLED IN MEXICO
CAUTION:
DECORATIVE GLASS:
WARRANTY INFORMATION:
Complete curing of the finish over a polymer part generally requires a longer
period of time than on other surfaces.
Our Therma-Tru artisans have hand-crafted the decorative glass in
this door system, and as with any hand-crafted product, no two are alike. Slight irregularities
and imperfections should not be considered defects.
This product is covered by a limited warranty. The warranty
does not cover defects that are the result of finishing or installation not in accordance with our
instructions. For further information contact:
Durable Doorlite Frame
•
•
•
No warping
Can be painted or stained a dark color
Can be used behind a storm door