Instructions

Finishing Instructions
SITE 2 2014 2.13
Doorlite Frame Finishing
9/5/07
DLLBLFG
TO REMOVE GLAZING COMPOUND:
FINISH DOOR WITHIN 6 MONTHS OF EXPOSURE.
PAINT:
STAIN AND TOPCOAT: For Classic-Craft and Fiber-Classic products use a
Therma-Tru Finishing System Kit . Therma-Tru Finishing System Kit
www.thermatru.com
1-877-99-STAIN (997-8246).
Wet with window cleaner or water first. Use razor
blade to score glazing along edge of frame. Holding razor blade at a 45° angle, scrape
glazing from glass. Wipe remaining residue off with window cleaner or mineral spirits.
Clean first with mild detergent and water or TSP solution. Rinse well and allow
to dry completely. Prime first with an alkyd- or acrylic-based primer and allow to dry.
Then paint with a high quality, exterior grade, acrylic-latex house paint.
Note: Smooth-Star Doors do not need a primer before painting.
To order a ,
contact your local Therma-Tru dealer, visit us on the Internet at or
call toll free at See the Finishing System Instruction
brochure or the Corner Door Tag for more detailed application information.
® ®
only
THERMA-TRU DOORS Technical Services Department
1750 Indian Wood Circle • Maumee, Ohio 43537 1-800-THERMATRU (843-7628)
•
• • www.thermatru.com
ASSEMBLED IN MEXICO
FLUSH-GLAZED DOORS
AND SIDELITES
CAUTION:
DECORATIVE GLASS:
WARRANTY INFORMATION:
Complete curing of the finish over a fiberglass product generally
requires a longer period of time than other surfaces.
Our Therma -Tru artisans have hand-crafted the
decorative glass in this door system, and as with any hand-crafted product, no two
are alike. Slight irregularities and imperfections should not be considered defects.
This product is covered by a limited warranty. The
warranty does not cover defects that are the result of finishing or installation not in
accordance with our instructions. For further information contact: