Design Guide

DISHWASHERS
1.800.735.4328 | THERMADOR.COM 295
DISHWASHERS
EMERALD
®
4-PROGRAM
DWHD440MFP / DWHD440MFM / DWHD440MPR
INSTALLATION OPTIONS
CUSTOM DOOR PANELS (DWHD440MPR)
Fully integrated models allow you to have a custom
door panel made to match your cabinetry. The custom
door can be a two-piece conguration to look like a
drawer at the top and a cabinet door at the bottom or
like a single full-length door. A template is included
with the fully integrated models to explain the
mounting procedure.
NOTE: This dishwasher can accept custom door
panel weights ranging from 7 to 24 lbs.; however, the
dishwasher comes from the factory ready for custom
panel door weights from 11 to 18 lbs. If you plan on
using a door panel that is not 11 to 18 lbs., please
contact customer service at [phone].
WATER AND ELECTRICAL LOCATIONS
For proper dishwasher operation and appearance,
ensure that the enclosure is square and has the
dimensions shown. Plumbing and electrical service
must enter shaded area.
Make required openings to allow for passage of
the water, drain and electrical line. In order to avoid
interference with the dishwasher when sliding it into
the cabinet, place your openings within the dimensions
shown.
WATER AND ELECTRICAL LOCATION
DIMENSIONS
DISHWASHER & CUTOUT DIMENSIONS
DWHD440MFP / DWHD440MFM
DWHD440MPR
3
3
/
4
" (95mm)
2" (50mm)
23
5
/
8
" - 24
1
/
4
" (600-616mm)
34" (864mm)
4" (100mm)
90°
24" (610mm)