installation instructions

Page. 5
Pro Chimney hood telescoping
duct cover extension
Compatible hood models
Telescoping extensions accommodate 10 ft. (3 m) ceilings.
Securing the Pro Chimney hood telescoping extension
1. To prevent scratches, lay paper over the edges of the
lower flue duct to protect the surface.
2. Ensure that the minimum height of 30'' (762 mm) from
the bottom of the hood to the cooking surface will be
maintained (see the hood’s installation instructions).
3. Locate two studs at the mounting location. At the wall
stud locations, measure 1¼'' (32 mm) down from the
ceiling to the middle of the bracket.
4. Mount the bracket at the wall stud locations using (2)
½'' (13 mm) screws (provided). Ensure that the bracket
is level.
Model Telescoping extension
HPCN36WS CHMHP36TW
HPCN36WS CHMHP36XTW
HPCN48WS CHMHP48TW
HPCN48WS CHMHP48XTW
14"
(356)
14"
(356)
14"
(356)
18"
(457)
18"
(457)
18"
(457)
1¼" (32)1¼" (32)1¼" (32)
18"
(457)
18"
(457)
17"
(432)
17"
(432)
18" – 35"
( 457 – 889)
18" – 35"
( 457 – 889)
18" – 35"
( 457 – 889)
30-¾" or 35-7/8"
(527 or 835)
30-¾" or 35-7/8"
(527 or 835)
30-¾" or 35-7/8"
(527 or 835)
inches (mm)
1¼" (32)1¼" (32)1¼" (32)
inches (mm)